Jump to content


plaviator

Members
  • Posts

    1
  • Joined

  • Last visited

Profile Information

  • First Name
    Michael
  • Jaguar Model
    S-Type
  • Year of Jaguar
    2004
  • UK/Ireland Location
    Hampshire

plaviator's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. Sometimes I get "Gearbox Fault", "DSC not available" and "Park Brake fault" come up as key switched on. If I cycle the auto gear lever these faults disappear but still will not start. OBD scanner records FAULT:00, PEND:02 These are shown as U0121 Lost communications with ABS control module & U0073 Control module communication bus off (generic) I have disconnected the battery overnight and charged fully but all is still the same
  2.  

    2004 S-Type 2.7D when attempting to start, nothing happens.

    Sometimes I get "Gearbox Fault", "DSC not available" and "Park Brake fault" come up as key switched on. If I cycle the auto gear lever these faults disappear but still will not start. OBD scanner records FAULT:00, PEND:02 These are shown as U0121 Lost communications with ABS control module & U0073 Control module communication bus off (generic) I have disconnected the battery overnight and charged fully but all is still the same

    1. JOE-DOT-COM

      JOE-DOT-COM

      Hi

      These are common and usually caused by a low battery

      have you checked the battery voltage, should be above 12.5 volts, if the voltage is lower than this battery may need replacing

      also sometimes these faults caused by a low battery will need reseting with jaguar IDS/SDD before they will clear

      Ideally you need to get it plugged in to see what faults are listed, generic code readers will only read and clear engine codes, not gearbox, dsc or epb faults,

      cheers

      Joe

×
×
  • Create New...



Forums


News


Membership