Jump to content


braincrush

Members
  • Posts

    25
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Gallery

Store

Premium Membership Discounts

News

Videos

Posts posted by braincrush

  1. I have had a good drive around last night (motorway) where i could recreate the situation in which my cat was all jiggery, and ... nothing ! all nice and smooth ! i have to admit, that's a first, normally i would share your opinion Trevor (sods law and all) that's why i am so excited still :) i will replace the rear row when i get a moment, but since the problem is gone i can sort rear discs and pads next (probably this weekend)

    wish me luck :)

  2. hi i am in the middle of replacing coilpacks on my motor, all the tutorials i've seen however show a different type of manifold (mine have round pipes) and im stuck ...

    i hve 6 bolts taken out but something is holding manifold at the top-right corner, i can feel the bracket at the back but im not sure if i can get to the bolt (extremely tight) 

    could someone tell me if this is the bolt i should attack or is it something else holding it ?

     

    [uPDATE] Had to throw in the towel, there is no chance for me to stick my troll hands into that tiny gap, there is a 3/4" wiring loom obscuring the access also, i will try next weekend when i acquire longer ratchet extension...

     

    i have replaced the front coil packs, 1 was different then all the rest, and two had split rubber seal on the tip...

  3. yup , that's exactly what I've done, i should have used some wood to put between the metal  but when I've realised that it was time to start.

    The job went surprisingly well, though while replacing the track rod ends I've noticed that anti-roll bar links are in poor shape and i have to go in there again this weekend (if the order will be delivered in time)

    • Like 1
  4. I'am ready to do some work on my car  tomorrow (if the weather allows it) and have a question.

    Some time ago I've lifted the front of the car and removed the wheel to inspect the outer track rod ends (that's the first thing i will replace) and i used my halfords 2ton trolley jack, i did used similar jack on my previous cars the heaviest probably BMW 528 or 735 both (in-line 6) and they went up no problem, in the x-types case i was literally afraid i will snap the handle because i had to apply so much force to lift it, i maybe overreact a little because other cars were so easy to lift, but i would feel much better if someone would say its ok to lift it with the 2 ton jack high enough to put it on axle stands.

     

    PS. I've used points designated in the service manual.

     

    vowpp4.jpg

    pr60e8.jpg

  5. 1. Fuel economy : is ≈ 21.5 what i should expect (light foot driving trained on many large engine automatics) or is it too much ? i have to add that one of the lambdas is gone (i will go code reading after new year to diagnose some issues)

     

    2. Uphill (when going light on acceleration) the box is acting like it doesn't know whether to shift up or not, which causes a bit of jerk, no issue on flat/ down hill or when put a bit more weight on acceleration pedal.

     

    3. Before I've bought the car, previous owner replaced the bearing on passenger side rear wheel, and apparently the sensor wire broke (the mechanic soldered it but the ABS light is on) he mentioned that its an abs sensor that is fitted with the bearing but the wire is a separate part (detachable) question is : is that true ? And can i replace mentioned wire ?

     

    Seb

  6. Hi all,

    my name is Seb and as the topic states i just became an owner of my first Jaguar, '01 X-Type Sport to be exact.

    I wont try to write anything clever since its Christmas and i'am enjoying a bit of JD, and it would end with a massive fail most likely.

    Anyways, happy Christmas everybody !  

     

    this is my new vehicle :

     

    jx.jpg

×
×
  • Create New...



Forums


News


Membership