The Prof

I swapped my x-type for an XF this week. Nothing wrong with x-type but decided I wanted an automatic. Looks like I will be also moving to the XF forum. Good luck everyone, I learned a lot from the threads. ken

Did some long distance motorway driving last week. Couldn’t believe it when the car returned 51 mpg. The hub must have been sticking for last few years - no play at all in it, just an intermittent squeak.

Wheel bearing didn’t have any movement up/down or side/side. It just made a high pitched noise when going round a right turn corner. I think the grease was overheated when my calliper jammed last year. Drove 1000 miles since and mpg now up to 45 mpg from 35. 🙂

After my incident with the security post I have now replaced or repaired the coolant hoses and the guard underneath. Then a wheel bearing rear passenger side decided to make noises. All sorted now 🙂 torx screw heads were badly rusted and had to grind them off. Welded nuts to the remaining studs and they came out after applying heat to the hub carrier.

I have identified the long pipe that goes to the heater booster. I really need help with the pipe that I have arrowed . It sits beside the inter cooler pipe.

I saw something similar during the troubles here. A car drove over an automatic bollard at a checkpoint and got impaled - complete writeoff. I’ll take photos in the daylight and post them. 2 pipes/hoses are damaged. The long one running past the catalytic converters has a hole in it - there seems to be a clip missing to hold it up. the other pipe is a solid piece that runs under the engine towards the radiator. Hopefully someone will be able to help me identify them.

I saw something similar during the troubles here. A car drove over an automatic bollard at a checkpoint and got impaled - complete writeoff. I’ll take photos in the daylight and post them.

Today I installed a nice fold down security post. Reversing over the post in my nice x-type sport I heard and felt impending disaster. The post caught and ripped off a coolant pipe while damaging a second. No idea what the part numbers are - definitely coolant. If I post photos tomorrow would it be possible for someone to tell me what to order. The underbody shield was hanging down a bit and must have caught and lifted to post. Ps my wife thinks I am a plonker for creating this mess. ken

At that price you couldn’t go wrong

Hi Rich, I have it all aligned now. Just drove 600 miles and no sign of uneven wear so far. I had a good look at all the bushings on the old control arms and they all shows signed of being slightly perished. I took the car to a professional to realign the suspension after I replaced all the control arms and it was worth every penny. I really like your parts diagrams - is it possible to purchase this software? Ken

My 2007 2.2 D estate hit a pothole and smashed front spring with thrust bearing on passenger side. Replaced them but noticed serious swaying at rear with massive wear on insides of rear tyres. Slip test showed 11m slip per Km to the near side. Suspension tests showed up fine. Adjustment of toe was not improving things and mechanics said to get rid of it. Anyway I am stubborn so replaced all control arms in rear and now slip reduced to 1 m per Km. running tests on road now to check wear. Confused as to how the alignment could be so difficult to adjust without replacing the arms and yet they all appeared in good working order.

Be interested to see if Dyno reading has improved much

Years since I heard that song 🙂

Problem solved with a bit of epoxy resin to stick the trim on

The quarter waist seal fell off my 2.2D x-type estate and left the remains of 4 bits of rusted clips connected to the glass. Contacted Jaguar and the 4 clips only come with the glass at a cost of £500. I have a replacement waist seal and was wondering if anyone can provide a photo of what the clips look like so I can manufacture my own and maybe save a few hundred quid at the same time. Can't believe they only come with replacement glass! Better still, if anyone knows where I could buy the clips I would really appreciate the help. Ken

Problem sorted. A pipe had come loose from the turbo. Car running sweetly again.

Joe there isn't any hissing or gushing sound. The smoke is clear - sitting in neutral i can rev the engine to max and only a small amount of black smoke comes out. Definitely no blue smoke. I will try to feel the turbo shaft tomorrow and see what happens. Ken

Today i accelerated to overtake some cyclists and there was a bang followed by a loss in power. Don't worry i hadn't struck the cyclists!!! I can drive slowly but as soon as turbo needed there is nothing. I cant hear any metal on metal scraping and have checked for loose/broken hoses. Not convinced it is the actual turbo - could it be the EGR? No error lights showing. Any help or suggestions would be much appreciated. Until now she has been going a dream.

I recently noticed an intermittent hum coming from the rear nearside wheel. I had it checked by a garage and they see nothing wrong. Strange that it comes and goes and only when speed around 60 mph. I think it is the bearing but garage says it tests fine. Any thoughts would be appreciated.

Sorry for the delay. Washer pump fixed - removed the pump and although i could blow air through it the water wasn't being sucked through. Discovered a fine film of gunge lining the output pipes. Removed the gunge and problem sorted.

I disconnected the pipe at the bonnet hinge and blew air back into the reservoir. It definitely isn't blocked - pump still makes whirring sound when activated but no water coming through. I think the pump might need replaced.

Peter I bought a Haynes manual today and the pump is combined. It might be clogged up so i will try to access it via the front wheel housing. Oh the joys :) i thought i had left these jobs behind when i sold my defender :) Ken

My Front and rear washer pumps have suddenly stopped pumping water. When I press the switch for them I can hear the pump working but no water and also the water level in the reservoir doesn't drop. Is the access to the pumps (is it one combined pump or two separate?) easy? Any advice is welcome. Ken

Thanks guys - all sounds good to me.