Londonmike

Good idea

thanks for the reply have been looking at the workshop and as you say cant find these, however I think the injectors are out.

Hi I got these from my foxwell can any one enlighten me? well had a little go with the magic box and its come up with, B1242 Recirculating air flow Door actuator circuit failure. B1265 Cool air servo motor circuit failure P010c Mass or air flow B circuit low P010P Mass or volume air flow sensor A/B corrolation Exhaust gas reticulation valve set-point 12.37 O controller -5-13 Valve 1 controller -5.00 Deviation Fuel pressure 27.6 Injectors 1. 1072 2: 773 3: 1144 4: 975 5: 1056 6: 918 Manifold absolute pressure senor 102.000 Mass air flow 0.640

so as the club have given me help I'll do the same any one who needs to read their codes can use my foxwell at mine if needed.

your lucky not even had an email back that' over 2 weeks wait still they don't care about customer service. still the foxwell seems good so you are more than welcome

well had a little go with the magic box and its come up with, B1242 Recirculating air flow Door actuator circuit failure. B1265 Cool air servo motor circuit failure P010c Mass or air flow B circuit low P010P Mass or volume air flow sensor A/B corrolation Exhaust gas reticulation valve set-point 12.37 O controller -5-13 Valve 1 controller -5.00 Deviation Fuel pressure 27.6 Injectors 1. 1072 2: 773 3: 1144 4: 975 5: 1056 6: 918 Manifold absolute pressure senor 102.000 Mass air flow 0.640 will do more tomorrow do you feel that these are OK as I have not put the DPF back on yet and what would make it smoke so much.

Hi All Just an up date got a foxwell 644 automaster pro. so far a good machine so if any one needs to clear their codes and in west London then give me a call.

well got a reader Foxwell 644 automaster pro oh boy should I have got it lol the codes came up like Christmas lights hopefully will get the DPF by the 20th and then fit it, got the middle box already need to buy the sensors now but which ones??? still smoking badly but I think its because the systems not there and one of the erc are stuck but which one ha ha.

well have now had it place back to what it should be, ha now the only thing is it is not talking to my little blue box from a well know site. it came up with reduced performance once and not again, still smoking. need to get a ' good' reader I think.

erm me thinks you need to take EPB off AFTER putting some in front of the front wheels I use wooden blocks the cat won't move

oh boy like you British one has not worked so sent it back week after getting it still waiting for refund 😣😣 as tried it on my friend's xj and it still did not work even went a got a new laptop with new xp on eBay. now looking at dealer's ex model or foxwell 6400 .

hi thanks Pete yes have tried that and as this car is really to good to go to car heaven and after working in jaguar s in the early 70"s they have come a long way some of it not good but there in a better place oh I disguising 😁 look at a spending 1000 on it and it will be like new 🤣🤣 well nearly what new car will give the smiles for miles a plastic ford or jap or even Merc now. no I'll get this old cat back to health.

Hi, well got a ecu reader and its NOT the one from British as that has not worked, went to a local garage who did some other work as it was smoking badly. new filter and diesel, but they could not read the ecu, nothing not a light on any thing then found out its been remapped and had the DPF removed. would like to return back to stock and replace the DPF as I know this will be a problem next year for MOT Any one done this please?.

n

hi you still do this as I can't marry my Samsung up on a 06 plate.