jezz6570

The local car dismantlers will not accept them as they are already off the car and could be stolen ?.the car has since been scrapped after i sold the body engine and gearbox. To a buyer who wanted to fit the running gear into a mk11 capri

Many thanks will do

Has anyone replaced the complete dash top on the x250 . Mine has suffered the dreaded heat bubble. And lifting. But have managed to get a 2nd hand one in mint condition. Now just need to swap it out

Has anyone replaced the complete dash top on the x250 . Mine has suffered the dreaded heat bubble. And lifting. But have managed to get a 2nd hand one in mint condition. Now just need to swap it out

Just had my 2007 2.7d s written off due to a minor front wing dent. (See pic) didn't let her go though. Cat N uneconomic to repair( joke) would rather pay me the best part of 2k than spend £350 to repair( quoted by a local body shop) i have used before and do vintage restorations. Only problem now is car will remain on insurance list as a cat N.. insurance company must have an ongoing deal with copart. As they text me to ask when they could collect the car. Told them never. Anyone else had this happen

Still have the panels. Do not want the scrappy to have them and take them to be crushed.

Free to a good home 1999 jaguar s type front and rear bumpers shells. In mistral blue. Taken from my 1999 3.0 se. Car long gone but have some spares in the garage. Had no plans to get another but now have a 2007 2.7d. So body panels will fit but bumpers a different style Need the space in my garage and they will Free Collection only Message me here Or email [email protected]

Had a similar problem on a peugot 206cc turned out there was a bearing sitting on top of the strut that had cracked after the previous owner hit a pothole. Think from memory there is a rubber damper on the top of the strut on the jags also

Have you had the shock absorber top mount checked not sure if there is a bush or a bearing

Thanks joe But as previously said mechanicals and body work i can do electrics is not my thing. May try to get a wnd hand unit from an xf and see if it will work

Thank you for the reply. The reason i asked this question is on my 52 s type se+ the wing mirrors folded on locking from the keyfob. Also my 08 xf does the same. Is it possible to fit the xf module to and s type.as would prefer a plug and play solution rather than play around with it myself .mechanics and body work i can do . Electrics is s dark art

Hi all. Looking for some info. I have a 2007(56) 2.7d s type s I has folding mirrors but i cannot get them to fold in automatically when i lock the car. Manual folding works fine. Am i or is the car missing something . . Many thanks

Have you had the sock absorber top mount checked not sure if there is a bearing on the top of the shock or just the rubber mount.may even be the collar at the top of the spring.

Body panels still available

Try mark at jagrar he currently has a few s types he is breaking so may have a good condition seal

Hi all Can anyone help. I have just retrofitted a pair of jaguar xf hid headlights the items were fully working before fitting .but now fitted i cannot get the sidelights to work main and dip all good but no sidelights. My old units had the w5 bulbs but the new ones have h8 bulbs have replaced the bulbs are the were a little burnt. But nothing from the new ones Any ideas ???

How much would you be Asking for the brembo brake calipers front and rear . And the mounts

What condition is the underside . Sills and subframe

Hi mate how bad is the body work damage

Hi all I have a selection of body panels for the early 1999-2003 s type in mistrial blue. Need the room in my garage . So if you need or know anyone who needs parts please let me know. 2 bumpers bonnet boot 4 doors with glass. Cashmere carpet 4 door cards Door seals 2.5 v6 petrol engine in need of a head gasket. Inlet manifold plus a few others. As I said need the space also will not fit my new 2.7d 2007 s type

Hi all just wondering if anyone requires any body panels. Have them listed on ebay but now need the space in my garage back. S type se mistral blue 4 doors bonnet and bootlid plus front and rear bumpers. May also still have 2 front wings. Plus various other parts. Would love them to go as a job lot. Email me [email protected]

FOR SALE T reg 1999 Jaguar s type 3.0 manual trans Spares or repair ( too good to break) Upgraded interior beige and black leather interior with se alloys Finished in mistral blue. Currently sorn as failed mot on rear subframe corrosion Subframe partially stripped but all parts in boot. Replacement subframe waiting to be fitted but now also needs welding to drivers side sill. Have sourced parts on ebay and internet Outer sills are available as a pair on ebay for £149.00 and inner sill strengthener panel is available from jaguar themselves or from barret jaguar on the net £168.00 But due to a motor accident not had time to complete. Now in need of the space as adopted an xf. Car runs and will be able to drive onto a trailer once sold will need rear shocks and discs refitting. Many other spares also available which if required can be included in the deal if car secures price required Viewing by arrangement and recomended message for location and contact number to arrange 07870643683

Hi guys having a garage clear out Many parts available for a s type 3.0 1999 auto Body panels doors, bonnet ,boot lid, Door glass 2 sets of wheels 16" Some plastic exterior trim panels Some interior plastic trim J gate Servo Master cylinder Radiator Etc Please email me and i ll see what i ve got [email protected] Need the room Open to all sensible offers also have numerous electrical parts Collection only on larger parts

I have for sale various parts - trim, seals, body panels and mechanicals taken from aa 1999 3.0 se mistral blue with cashmeer interior . Too many to list Email me for details and any parts you may require and i ll check if i have them All items must go as need space back in my attic and garage Open to offers for the job lot [email protected]

Hi all been having the same problem on my 53 2.5 se After the radiator went bang Since then i have had to replace the top hose But still have a coant leak Then the other day i put some drain dye into the expansion tank hoping to locate the leak and suprise suprise there it is . The rubber seal inthe middle of the v that seals the radiator coolant return pipe (a cast aluminium part that is bolted on one side but held in the other by a rubber seal ) only thing i now i ll have to take the intake manifold off to remove the ofending part and replace the seal But as the manifold will be off i will take the time to change the plugs as they are due soon Hope this info helps