Hi everybody,

 

I wonder if someone can help me with my problem?

 

I've cleaned the inlet manifold and at the same time replaced the egr value, then I put everything back together but I'm finding that the engine will turn over but will not fire.

 

My car is a 2005, 2.0 diesel X-Type.

 

 

I'm going to take everything off and see if I've missed anything.

 

Does anyone have any ideas as to why It's not starting? it was starting fine before I did this.

 

Thanks in advance,

 

Ieuan

If everything was fine before the strip down Ieuan why take it apart for a cleansing? Again if it was all starting and running fine before the strip down I can only assume something as been missed whilst re-assembling. I cannot pin point your problem not being there but wish you luck in finding it.

Hi Kenny,

 

Thanks for your reply.

 

I decided to change the egr and clean the inlet manifold because I was seeing smoke when I was accelerating, and was experiencing stuttering about 2000-2300 rpm.

 

I'll keep you posted.

 

Ieuan