Hi all,

New to the club, but have wanted an F pace for a long time , albeit it I'm repairing a damaged car! 😕,

I have 2 fault codes , P0715 input/turbine speed sensor and P2617 crankshaft position signal output circuit/open,

Questions are, are they expensive, and would I be able to change them myself?,

Any advice would be greatly appreciated 😊👍

Here are some options on the CKP :

https://www.ebay.co.uk/sch/i.html?_nkw=jaguar+f+pace+crank+position+sensor&_sacat=0&_from=R40&_trksid=p2332490.m570.l1313

Can't find the other sensor you mention using your description on ebay but if you try the other usual suspects such as Amazon, ECP and so on you'll probably find one.

 

Thank you for the information 🙏👍

You're welcome - as an afterthought, if it's not sensing the CKP, it could be the other sensor is doing what it should but as there's an incorrect signal from the CKP, it reads the other one as faulty too. I'd do a reset after fitting the CKP and see what you've got.

Thanks again, it seems quite easy to change this sensor, but not the other one, apparently it's inside the transmission, don't know if I'm confident enough to change that one 😕,

But then it may be an idea to change the fluid as the car has done 51000 🤔