Maf sensor

[Caukhead]

I've just found the connector plug on the loom has the two central wires are not connected . The terminals a naf. Does anyone know where I can get a new connector from please

[msmicksmith]

Easiest way is to find a breaker, possibly eBay, and cut the wiring leaving one longer than the other to ease insulating them, and solder it onto your wiring loom having cut your plug off leaving the wires in similar staggered fashion. Once insulated it'll be fine. If you can, get some insulating sheath. This is slipped over the wires prior to soldering, then you simply slide it over the soldered section and heat it gently with a heat gun or a naked flame if you don't have one and it shrinks to form a tight, weatherproof seal around your repair.

[Caukhead]

All fixed! A friend of mine suggested vehicle wiring products on www.vehiclewiringproducts.co.uk.

Pack of 10 water proof connector terminals at £1.80 delivered next day 10 minutes to solder in good as n ew!! In all a simple fix

[msmicksmith]

Excellent. Glad you got iy sorted easily.

I'll take a look at thay website. Thanks for the feedback