jacoma

Paul

any luck with premium sound 

thanks

13 minutes ago, Raistlin said:

If you want, I can look out for you. What colour parcel shelf?

It’s called warm charcoal grey/black

thanks

11 minutes ago, Raistlin said:

Amp, door speaker, parcel shelf with subs. a D2B cable

Thanks will keep eye out

On 8/16/2018 at 5:01 PM, Raistlin said:

No, but I can let you know if you decide to go that way.

Paul

wht would you need to upgrade to premium sound 

thanks

peter

26 minutes ago, Raistlin said:

The other module is the phone module Peter.

Pleased you solved it 🙂

Perhaps now you will fit the premium sound system 😉

You never know, do you have a link to say what you need.

Paul and others that replied SUCCESS

After stripping out half the car, there was another unit in the boot behind the bright metal plate. The voice module was at the top end, this module was at the bottom end found it by accident feeling around, after removing the sat nav/cd. The grey blocks I assume must fit something else, the optic cable had fallen out of that clipped it back in and all working.

really appreciate the guidance

Peter

Paul 

Thanks for you help I have attached a rough drawing of the connections, not sure what the unit is between outer and inner wing it also has connector block going from it

Photos as

Thanks for all the help reading "my stuff" d2b guide, I have in my boot when I undid the cd and nav units a loose d2b  spare cable and some grey blocks should there be some sort of link on the d2b cable to allow the loop?

Thank you 

is there a cable layout for this which shows the cable travel through the car, alternatively the exact whereabouts of all the modules,

aa a side my phone still picks up the Bluetooth. 

Hi

Have checked connections both ends and all connected ok, there must be some joints somewhere, as to be that as all fuses ok, somebody must have encountered this before.?

thanks

Can any one help 2006 2.7d 

went over a bump lost phone cdc link and voice on sat nav,radio and sat nav still works , checked eject+mix just says main so assume joint apart somewhere can somebody tell me please where to look

thanks