Alan1100

hi all have found a great web site where you can get electric manuals on all jags up to 2004 for free heres the web address  www.captinjaguarscathhouse.com/electricalreference.htm

hi i have had to do this its not difficult. but be very sure that you re attach the moisture barrier .as it also stop water leaking in and will save you doing the job twice

hi i have 2 lpg cars one is a Jaguar (of cause) the only down side is the loss of boot space .if you take a look at www.drivelpg.co.uk that should help answer any questions . also have look at /www.autogas.ltd.uk

cheers alan :)

i am not the best with computers there should be some pictures in the attached file

IMG_0001.pdf

hi this is what the jag manual says hope this will help you

Control Components - Ambient Air Temperature Sensor

Removal and Installation

Removal

1. Remove the radiator splash shield.

For additional information, refer to Section 501-02 Front End Body

Panels.

2. Remove the radiator lower cowl.

3. Disconnect the ambient air temperature electrical connector

4. Remove the ambient air temperature sensor.

Installation

1. To install, reverse the removal procedure.

Hi Banbury