Been trying to fit a cdc so I've been disconnecting and connecting the fibre optic cable..now my phone works and my sat nav works but there's no voice command on the sat nav...and when I do a check the screen reads "main 2.000" which I am lead to understand is my fibre optic cable. ..any help would be appreciated thanks

Can you be more specific with what you've done to the fibre optics please Gary?

I've fitted a cdc ( first one was faulty ). Now the phone works the cdc works and the sat nav works but still no voice command. ..and I'm still getting main 2.0000 when I press (eject &am/fm then eject & mix) ..

Did you have JaguarVoice initially?

Yes..I'm wondering if I've got the optic cables in the wrong sequence as there are no labels on them showing what goes where

Sorry. .jaguar voice no...but the sat nav gave directions ie told me when to turn and how far etc

The phone is not voice activated

Possibly the satnav audio is switched off in setup Gary?

In the meantime, I'll dig out the D2B connection order when I get home.

Tried it ..and the default setting ..

Tried it and the default settings

Thanks a lot. .I've tried getting a good picture with the labels on ie phone..cdc..sat nav ..but no joy

Sorry for the apparent delay Gary. I did post up the D2B sequence but for some reason the post has vanished. Maybe I didn't click on "Post" - I'll make sure this time

 

The sequence is:-

 

Audio Head Unit

CD Autochanger

Telephone Module

Voice Module

Navigation / DVD Module

Premium sound Power Amplifier

Then back to the Audio Head Unit

 

 

I've heard that the order isn't critical but also heard that it is critical so I've always used it and never had a problem.

 

Hope this helps.

Will give it a go ..cheers