Hi all

 

I have recently removed and cleaned my EGR and must say that the Car no longer smokes from the exhaust.

 

I then also installed a EGR Plate that I had bought off ebay.

 

The EML Engine Light has however come on and I now removed the plate but the Light is still on.

 

Is there any way in turning the EML off without going to a Garage or spending money on any software.

 

I do have a basic OBD2 Cable but don't want to invest in any software as I am planning to sell the Car now.

 

Thank you all for your help.

 

 

Hi

If you disconnected the EGR and then switched the ignition on, it will logged a engine fault

and will need a diagnostic tool plugged in to reset it

do you have the touch screen , you can bring up fault codes on that and reset them

cheers

joe

Quote

 

thanks for your help buddy.....well i own a samsung galaxy s6 if thats what you meant by touch screen ?

hi

no lol

does your car have the touch displays, some jaguars with the touch display, by pressing certain buttons you can access a diagnostics screen, where engine fault codes are displayed and can be reset

cheers

joe

hi joe

 

haha...lol silly me :*)

 

my car doesnt have the touch screen unfortunately...i guess i will just have to pay the local garage man his treat then....thanks anyways for your kind help and support my friend :-).

Hi

Its a shame you dont know someone with one

most generic/unversal code readers will read engine codes

get a price first and you can get a universal code reader nowadays off ebay for less than £20, this might be your cheapest option and can be used again and again on any car

thanks

Joe