Do Not Sell My Personal Information
Jump to content
View in the app

A better way to browse. Learn more.

Jaguar Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Welcome to the Jaguar Owners' Club!

Membership is completely free, and our community is built by enthusiasts, for enthusiasts. We’re a proudly independent, non-official club, so all the help and opinions you’ll find here come directly from members with real experience of Jaguar Ownership from REAL people.

Join the club! Become part of the community!

 

Inlet manifold fuel rail

Featured Replies

Hi wonder if anyone can help

I've just purchased a 2001 3.0 S type as a bit of a project 91000 miles and quite reasonable 

Plugging the OLD reader in it pulls up a misfire on 4 and 6, pulled the inlet manifold off and changed the coils and plugs but managed to pull the inserts off two of the lower manifold securing studs and one was previously snapped off

Found these on flea bay and we're wondering if there is any difference between the 2003 and 2001 engine

Look at this on eBay http://www.ebay.co.uk/itm/112122522100

Look at this on eBay http://www.ebay.co.uk/itm/272310157302

 

Look at this on eBay http://www.ebay.co.uk/itm/131942345447

 

Thanks in advance

 

Edited by Wafoo
Spelling


Yes there is a different.

Your engine went from 99 to 5/2005 so make sure you get the same.

  • Author

Thanks for the info, the flea bay parts are off a 2003 so I'll invest in those

Cheers 

Eric

6 hours ago, Wafoo said:

Thanks for the info, the flea bay parts are off a 2003 so I'll invest in those

Cheers 

Eric

Sorry I had a mistake - 99 - 05/2002 are different from 5/2002 onwards!

Yup, they changed the inlet manifold on the later ones, so I suggest you need the earlier type Eric :wink:

The X200 was made from 99-02, which is what we both have. Mines a bit of a rolling restoration which I've had for 15 months now, helluva car for the money and coming on nicely :yes:

  • Author

 Ah......ordered the 2003 ones, ah well live and learn  🙄


Oppps! Sorry to hear that Eric, but at least it wasn't £hundreds. Makes me happy to be improving a 15 year old Jag and not a Maserati, Porsche or similar where parts would cost a fortune! Wonder how much an injector rail with inlet manifold would be on a Ferrari, more than £30 I bet!

Just been going though my bills for her, and while they're adding up, and I must stop buying stuff for the moment, it's not too bad, I think I have real value for money, and many of the parts are comparable or cheaper than any old hatchback. I figure it's best to be gathering bits now while they're plentiful, cheap and arguably still undervalued :yes:

  • Author

Yes, plentiful parts at a reasonable price works for me

Ordered a divider of a early 2002 now and next is the abs/traction control/stability issue which I'm hoping is a sensor on a wheel

Then on to the air-conditioning, then the passenger window which makes a noise but nothing happens, then a bit of corrosion on a wheel arch, then who knows....certainly suck you in these cars

  • Author

Well the breakers sent me the correct replacement part unfortunately it's hopeless, the whole rear corner is burnt and useless so much for inspections

However has gave me chance to fettle a bit and noticed one of the connectors for the cold start system has snapped off, the breather pipes for the head that connect to the airbox are perished and there was a vacuum pipe dangling under the car, on hunting around it appears to go to the fuel pump, the car has had allsorts of idling and revving problems so wonder if that is one of the culprits

So off to order some more bits and hopefully make some progress

Latest Deals

Scorpion® Vehicle Tracker Offer - Next Generation CAN-Bus Immobilisation

Disclaimer: As the club is an Scorpion® Partner, The club may be compensated if you make a purchase via Scorpion® links

Create an account or sign in to comment



Background Picker
Customize Layout

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.