5.0 Rebuild tools.

[marriosd]

Hi, I'm just starting on a full short block replacement on my 2010 XKR. I have the new block and as I'm reading up on what needs to happen for a successful engine rebuild. I'm seeing I need a lot of quite expensive tools, so far most are around getting the Crankshaft dampener off.

These are the part numbers

303-1437 Crankshaft Damper remover/installer

303-1438 Crankshaft Damper bolt removal/installer

303-1439 Crankshaft Damper removal plate

303-1440 Crankshaft Damper remover/installer stud

303-1441 Crankshaft Damper remover/installer body

303-1448 locking tool

303-1304 locking tool

Does anybody have a set of tools they might be willing to loan or rent for a few days, seems crazy to have to buy all these for a couple of hours work. Or if you know of any company that does a loaner/rental service?

Thanking you in advance.

Steve

 

 

[JOC Admin]

Found this reference to the kit...which also fits the Land Rover 3.0 litre V6

https://www.hinodetools.com/upload/instruction/AF0912 INSTRUCTION.pdf

[marriosd]

Hi Trevor,

 

Thanks for this, can you send me a link to who sells it please.

 

Steve

[JOC Admin]

Here are a couple of links I found on eBay....there may be others out there that are cheaper if you cross reference the individual part numbers listed in the previous post link.
Also, you could always sell it on afterwards and get most of the money back therefore a lot cheaper option

https://www.ebay.co.uk/itm/Crankshaft-Crank-Puller-Pulley-Set-Jaguar-Land-Rover-3-0lt-V6-5-0lt-V8/183595829110?hash=item2abf2a0776:g:5dgAAOSwRbpcG3Qi

https://www.ebay.co.uk/sch/i.html?_odkw=land+rover+3.0+MASTER+CRANKSHAFT+DAMPER+REMOVER+SET&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=+Crankshaft+Crank+Puller+Pulley+Set+Jaguar+Land+Rover+3.0lt+(V6)+%26+5.0lt+(V8)&_sacat=0