Do Not Sell My Personal Information
Jump to content
View in the app

A better way to browse. Learn more.

Jaguar Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Welcome to the Jaguar Owners' Club!

Membership is completely free, and our community is built by enthusiasts, for enthusiasts. We’re a proudly independent, non-official club, so all the help and opinions you’ll find here come directly from members with real experience of Jaguar Ownership from REAL people.

Join the club! Become part of the community!

 

Featured Replies

Hi all fellow members, I have a 2012 xf 3.0, and in these cold conditions only the drivers half of the front windscreen is defrosting. The passenger side stays frozen. Is this a possible know fault with the XF, is there a easy fix, any info advice will be extremely welcome.

Regards Baz.


Fuse F16 40A feeding through relay RLY 11 in the engine junction box. If there is power going through then check the LH connector, probably in the ‘A’ post.

  • Author

Thank you very much for the info...I'll look into it tomorrow...

Hi, I agree with Jim above. I didn't have a working heated screen after having a replacement windscreen. This was due to the cables in the A pillars not being connected correctly. Once working you will feel the glass getting warmer after a couple of minutes. You have the advantage of comparing each side as 1 side works.

Good luck

  • Author

Once again thank you for your comments. It's just to cold and wet, to start lifting the bonnet at the moment. But as soon as its suitable, I'll be checking fuses and connections.. thanks for the advice..

  • Author

Can I just ask gentlemen, do you access the connections from within the engine compartment,  or do I have to take panels off inside the car..any pictures, diagrams to point me in the right direction would be very helpful..


  • Author

Hi guys, re my heated screen not working and the advice given..I've just watched a YouTube video of how to remove the A pillar trim..and I could clearly see a wiring loom going up the A pillar, but I failed to see any connectors..am I looking in the right place, ???

  • Author

Thanks for the info and link, the photo makes it all quite clear where the connectors are.

Cheers chaps for all your help,  very much appreciated.

You’re very welcome, hope you get it fixed.

I have the same fault on my 2001 S Type, is it going to be the same as the XF?


Many thanks, very helpful.  I will have a look when the next dry day come along. 

You’re welcome, let us know how you get on.

Latest Deals

Scorpion® Vehicle Tracker Offer - Next Generation CAN-Bus Immobilisation

Disclaimer: As the club is an Scorpion® Partner, The club may be compensated if you make a purchase via Scorpion® links

Create an account or sign in to comment





Background Picker
Customize Layout

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.