Resetting service message on dash

[marki]

Hi AlI I had my 2.7d XS 2007 serviced today but the mechanic could not reset the service required message on the dash board. He got to the second stage but it would not reset. Has anybody got any suggestions on what I can do to reset it.

[JOC Admin]

Hi Mark,

 

I have listed a procedure, probably the same one that your mechanic used.

However, the trick to the reset procedure is to carry out each stage within a second or two for it to work.

Here goes....

• Insert key into the ignition 
• Hold reset (located on the right hand side of the steering column)
• Turn on ignition so fascia lights up
• let go of reset/clear
• hold trip (on the end of the stalk)
• hold reset/clear
• display should now indicate "resetting service mode" keep hold of buttons until...
• display now indicates "service mode reset"

 

Hope this info helps?

 

Regards,   Trevor