Jump to content


R12Y

Members
  • Posts

    16
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Gallery

Store

Premium Membership Discounts

News

Videos

Posts posted by R12Y

  1. Yes it is a simple process. The ACM box is like a small router type device which sits in the gear lever/ gaiter console...I.e. take the gear stick apart and lift the fascia...the ACM box can be placed there and wire can be connected to the audio system...then just route the connection wires I.e. aux/usb/ipod wires which can be placed in the centre console. You will need to drill 2 or 3 holes in centre console to hold the connection hub. You can find lots of instructions online.

  2. The touchscreen nav was already fitted on mine but I have taken apart recently and I think the wiring loom is fitted as standard to all jaguars so that units can be easily interchangeable. It would not make sense to have different wiring looms e.g. if a customer wanted a sat nav fitting after purchasing new.

  3. Battery was disconnected on old boy for a while and seems like has caused some errors on the audio system.

    The radio/CD/sat nav (Denso) are working fine as is the remote control on steering wheel.

    However I cannot activate the CDC function or connect USB to the ACM module that is located in the centre armrest.

    Also no bluetooth is showing; it just says No Phone is Fitted".

    I have tried to activate the system using the "secret" diagnostic menu - Hold Phone & Menu together for 5 seconds and when asked for a diag pin enter 1971. Although I would not mess with the software updates etc as things could go wrong!!

    Im going to check the fibre optic connections to the ACM tomorrow which are located under the gear lever gaiter console.

    Doe anyone know where the bluetooth module is located?

  4. If it has climate control and DVD reader in boot then you are good to go! If you source a Denso Sat Nav unit off eBay or Jag breakers you can actually install it in 10 mins!! For a "how to guide" search Remove Sat Nav X Type on Youtube...I know you will be installing it but the reverse process is similar as funnily I could not find a video of the install process!

  5. Update: It turns out a connection was loose on terminals hence no power. Unit is working now however new problem!

    It asks for radio code; I dont have this.

    Looking on forums I tried the following method: I entered random code 3 times until says please wait, I then entered >> AMEM PTY and code is deactivated and nav, bluetooth working but says Radio Off.

    Tried everything radio/cd will not work, sat nav is fine though.

    Also when I switch car off and turn back on the whole cycle starts again I.e. asks for radio code...no sat nav or phone works until do the whole >> AMEM PTY mallarkey...any tips gents?!

  6. Hi,my X type was parked for some time and battery drained.

    When I parked it the Nav was working fine.

    Having got it back on road last week and replaced battery; I get the dreaded C1 50 51 error and blank screen.

    Also I cannot remove Sat Nav Dvd from nav reader; it is non responsive.

    Any tips or help much appreciated as I am slowly roasting in the car due to blower always on! :-P

×
×
  • Create New...



Forums


News


Membership