Jump to content


  • Welcome to the Jaguar Owners' Club!

    Membership is completely free, and our community is built by enthusiasts, for enthusiasts. We’re a proudly independent, non-official club, so all the help and opinions you’ll find here come directly from members with real experience of Jaguar Ownership.

    Join us now!

     

Recommended Posts

Posted
14 minutes ago, JOE-DOT-COM said:

when you say the car won't start

does the starter motor turnover when you turn the ignition key, yes or no

or does the car starter turnover but the engine wont start yes or no

Nothing at all just turn the key and nothing all the electrical stuff works but just wont start make's no sound starter motor is fine battery's ok its weird

Posted

Anyway will leave it as is for now see if the injector cleaner make any difference if not will go from there

Posted

 

hi

looking back at you first comment,your problem was you could not get it out of park, its interlocked

just checked on my car,

you cant move it from park with the engine running or engine stopped unless you press the brake

you can only start the car unless the N or P are lit up red on the j-gate

you need to check these next time it wont start

this will tell where the fault is

starting.xps

the problem you will have is that you will only be able to check when the fault there,

I would be tempted to change relay 20 in the engine bay as this could fail with heat as its right next to the engine

you could swap it with another relay in the fuse box next time it fails just to prove it

 

 

ScreenShot168.jpg


Posted

(this is for a diesel engine.) The crankshaft position (CKP) sensor is located at the rear of the engine mounted to the cylinder block. It is used to detect the engine
position and speed of the crankshaft. It is a permanent inductive type sensor. Should the CKP sensor fail, the engine will not start. just another thing to try? again good luck...

Posted
3 hours ago, david moore said:

(this is for a diesel engine.) The crankshaft position (CKP) sensor is located at the rear of the engine mounted to the cylinder block. It is used to detect the engine
position and speed of the crankshaft. It is a permanent inductive type sensor. Should the CKP sensor fail, the engine will not start. just another thing to try? again good luck...

Hi Yes

the engine would not start, but it would turn over and crank and maybe so not start

he's getting nothing when he turns the key, engine is not turning, starter is not engaging,  so ckp sensor  does not matter

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now





×
×
  • Create New...



Forums


News


Membership


  • Insurance
  • Support