On my 2006 3.0 V6  S Type I've suddenly lost my rear parking aid sounds, but not the front! Is this the parking aid module in the boot, or the sensors? I've done a quick check of the sensors by turning the ignition on, but engine off, then putting the car into reverse and listening to the sensors, but no noise. Is it possible that a module would only affect the reverse sensors?

If I need to change the module I guess that I'll need to bear in mind that a new one would need to be suitable for both front and rear sensors.

Any advice?

Mick

Listening to the sensors is in no way conclusive proof you have a problem with them. Ideally, you should get yourself a code reader and see what the car says.

Do check the module connectors for any signs of water ingress.

Thanks for that Jim. I've been thinking about a code reader for a while, just not sure which type, a wired one or bluetooth 🤔

I have the same problem with my 2004 S Type rear sensors. Have checked the fuse and listened for the ticking noise from each sensors, all working okay. Can I ask- what's a module connector and where would I find it?

 

Thanks