I am a new member, with a problem,can anyone tell me how to remove the front hub in order to press out the lower ball joint,as the ABS unit is in the way <_<

 

what you need is a really big hammer some petrol and a box of matches

 

if the hammer doesnt work just set fire to the thing you will be doing yourself a favour in the long run

Hi Michael and welcome to the Club.

 

Richard has had a very bad experiece with his XF.

 

There are several members who have done the job you are looking at, and will point you in the right direction.

 

I do not get oily hands any more!

 

Regards,

 

Peter.

Hi Michael

 

This may help.????

http://www.jaguarforums.com/forum/s-type-s-type-r-supercharged-v8-15/diy-02-s-type-front-hub-assembly-replacement-abs-c1233-diy-repair-w-pics-faq-39466/

 

 

Frank

Thanks for the tip Lord H But I substituted matches for a space heater,that got it hot a little more under control,then gave the offending hub a clout with a small hammer, I am 60, and low and behold the blighter came out.Same thing on the ball joint,,now I am eagerly awaiting the prerequisite parts to reassemble the front suspension, I have done both sides.,will pop,down a local

engineering place to use their fly press when bits turn up.Mike