No sound

[Jaaaaaaaaaag]

Hi everyone, I've just converted to digital t.v. in the car for a fraction of the cost that any companies can offer (£50!) and it works a treat however I now have no sound/cd changer/phone module/voice control. I'm pressuming it's a D2B problem with the fibre optics, I have tried running the test procedure and neither combination of buttons do anything (fm/am + eject) also there is no light coming out from the fibre optic output on the back of the stereo. 

Anyone have any idea what I can check next?

[JOE-DOT-COM]

Hi if you have had the touch screen out,  I'd start there,  the cd changer is the master unit and generate the D2B fibre signal, make sure the fibres had not pulled from there clips, cheers

 

[Gareth livesley]

hi jaaaaaaaaaag ! I'm looking at doing this to mine what kit did you  use and where did you get it from etc etc

also how easy/hard is it to do? 

thanks Gareth 

[Jaaaaaaaaaag]

Thanks for the replies people, I've had a busy couple of weeks so I've only just had it back out to check and it was the fibre optic plug had come apart inside so all fixed! 

The soloution I came up with for the freeview was a car tuner and aerial for £40 (xtrons) and an RF modulator second hand for £10, it was a bit of a nightmare to wire up as there's four aerials into the car t.v. but it works well with good picture quality. If anyone wants more details just send me a message