Convertible roof air gap

[M50RSR]

Hello All

I bought this beauty last week and decided to clean in and around where the hood is stored as it was grubby... you do have to keep the new girl clean after all!!!. Anyway, I retracted the hood to halfway so as I could access the recess and then the roof started to fall and it then wouldn't operate on the switch. I disconnected the battery and touched the +ve and -ve terminals, but still not operating. Then I unscrewed the hydraulic screw and that allowed me to park the roof. Then it worked OK after that...

But... the roof now has small gaps behind the quarter lights and the roof cover (when it's stored) shut lines are not flush with the other panels. I'm sure they should be and I'm getting soot on the rear seats. 

Any thoughts as to what I can do to get the roof sealing and get the cover flush again? I fear I've done something expensive.

Thanks

Richard

[Jimbov8]

First thing to do is follow the manual reset procedure in the manual.

[Jimbov8]

In case you don’t have a manual here is the procedure.

https://topix.jaguar.jlrext.com/topix/service/archive/70706/convertible top.pdf

[M50RSR]

I will  do a reset and yes I have the manual thanks. But a dirty great cloud is just descending on us, so I think I'll try tomorrow if it doesn't rain!