Charles34

Hi Keiethstype27 Thanks for your feedback. My car is 4.5 years old. I have been able to reach the back of the Delphi alarm box, by lifting up the fuse box. Not possible to lift it up completely, as in the guide I mentioned previously, because on my model there is an additional loom that prevents this. I just had enough room to be able to disconnect the cable going to the Delphi box. Very hard to take the plug out of it. Did it with a plier. But you are right, the Delphi box seems to be fixed with a tamper-proof bolt at its lower point. The upper bolt is a normal one. After disconnecting this Delphi box, I have no beeps any more and everything else seems to be ok, including the main alarm. By the way, I am not sure to fully understand the necessity of this Delphi Alarm. Probably a second level of security if somebody tries to disconnect the main alarm. But lifting the fuse box and cutting the Delphi cables with scissors can be done in less than 3 minutes, so it's not a very secure alarm and I won't take the pain to replace it or investigate further.

Hi. I have the same problem with Jaguar S type 2.7D 2007 (2008 model). I found this guide about Removal of anti theft alarm/battery backup unit on a forum : http://www.jaguarforum.co.uk/viewtopic.php?f=16&t=28494 I was not able to follow this guide up ot the end, because my car is not exactely the same as the one in the guide. What I found and could be the faulty unit is a black box on which it is written : DELPHI 2R83-19G229-C0. I find on this link the same box : http://www.befr.ebay.be/itm/JAGUAR-S-TYPE-2-7-D-ALARM-SOUNDER-SOUND-2R83-19G229-AC-/220802946417?pt=LH_DefaultDomain_212&hash=item3368e19571 Did you find a solution with your problem ? I shall try to just disconnect electrically this box and see what happens. I don't know if I am allowed to do that. On my car, opening the doors sometimes stops this alarm (loud beeps, no horn), and sometimes not. And sometimes, even disconnecting the main battery does not stop these beeps, which make me think this unit has its own backup battery I'll post here the following of this problem as soon as I have a solution.