Jump to content


ChrisJ

Established Member
  • Posts

    104
  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Profiles

Forums

Events

Gallery

Store

Premium Membership Discounts

News

Videos

Posts posted by ChrisJ

  1. Hi all,

     

    my engine management light has come on, I have a code reader which is OBDll but cant seem to get it to connect is there any certain settings I need to set to get it to connect to the ECM ? 

     

    Auto-Search doesnt seem to work connecting via bluetooth

     

    Any advice

     

    thanks all.

     

     

  2. That will do the job admirably Christopher.

    You might consider changing the seal as well. They can sometimes be adverseley affected by certain screen wash solutions.

     

    Ok thanks for that information... It mentions single outlet on the listing ? does that mean it just for front washer ? I dont have rear wiper / washer. so dont need dual ?

  3. I changed my auxiliary belt recently and I found it a bit of a sod to be honest, glad I choose to fit a decent one so I don't have to worry about it again for the foreseeable. Similar to Andy's story, mine was running rough under high load and I took a punt it that it was nothing more serious than plugs and coil packs on the left bank. Luckily it wasn't and the problem is cured now, she goes better than expected TBH :)

    I think its brilliant that I dont have to worry about cam belt changes, car had a new alternator put on before i bought it last week so I'd presume a new belt would of been fitted.. it looks new.

     

    Didnt get a receipt.

  4. No worries there then.

    To chance the plugs on the left bank requires the inlet manifold to be removed. Pig of a job that even main dealers fail to change them.

    I nearly bought a car that was running rough a couple of years ago and the seller had plugs and coils changed on the right bank but still ran rough, spent too much at a dealer then decided to punt on.

    Missed a bargain there!!

    Where abouts in Yorkshire you from??

    I'm a Yorkshireman in exile in North Wales !!

    Ahhh I see, I'm in Hessle, just outside of Hull

  5. Hey folks,

     

    Im wondering what the mileage recommendation is as to when to get the cam chains renewed ? My S Type is currently at 70038.

     

    How many thousand miles is it to each change ?

     

    I have the 2002 (51) 3.0 V6 Sport.

     

    Thanks in advance.

     

     

  6. Bumper off job as far as I can recall Christopher. Changing it over is simple though.

     

    Suggest a replacement from the likes of Fleabay though rather than OEM.

     

    The old pump is simple to test once you get to it. Just pull the wiring connector off and apply 12 volts direct from the battery. No noise = replace pump. If the pump runs then you have a wiring fault.

    Thanks Ill get my mate to have a look at it for me and tell him what you told me, thanks.

     

    Whats the recommended amount of mileage before cam chains need renewing ?

     

    Thanks

  7. Hi all,

     

    New to the forum so go easy lol 

     

    I have recently bought an S Type.. when I bought it I was informed that the Washer Pump for the front windscreen is not working. Apparently, all wiring and fuses have been checked. Pushing the stalk for washer doesnt make a sound from the pump at all. Easy fix ?

     

    Thanks in advance

×
×
  • Create New...



Forums


News


Membership