Jump to content

convertible hood frame issue


Recommended Posts

My hood frame is out of alignment following a battery failure and manual closure. The drivers side of the  frame of the hood meets the windscreen about 15mm before the passenger side. This results in a loud clunk as the clamping hook drops into the lock in the windscreen frame. Once home, everything works fine. I think there's some adjustment in the throw of the hood using a section of the frame just by the rear side window, with the hood half closed you can see a short threaded bar which looks like it screws in and out, giving adjustment. Is this the case? 


Link to comment
Share on other sites

View all the latest Jaguar leasing deals here:

Limited Stock*for early 2022

*Due to the on-going semiconductor issues, the supply of new cars and vans has been dramatically hit. If you are due to change your vehicle/s in the next year or so you will NEED to start looking now to avoid disappointment or potentially being without a vehicle.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...