sparky01 Posted August 17, 2014 Report Posted August 17, 2014 Hi,everybody need a bit of help.just got car back from MOT,(collective groan)it seems the drivers seat will not go all the way back.having been in the correct position when i got it there has been no need to change it ,anyway,the seat itself sees to swollow change from my pockets whenever i get in the car,so i was wondering would it be possible for a coin to be stuck in the track,now comes the help how do i remove the seat to find out .cant find any information of how to removes the seat,so instruction will be helpful,the rest of the MOT wasnt thet bad,thanks in advance for your help.Adi. Quote
Old Peter Posted August 17, 2014 Report Posted August 17, 2014 Hi Adrian, An interesting issue, and I think you have got to the nub of the problem. I have never removed seats for about 50 years -- the last car I did that on was a 1962 Triumph Herald -- but I do believe that it is not too difficult. To prevent it happening again, deeper pockets would be the solution :) Regards, Peter. Quote
knightsmith Posted August 17, 2014 Report Posted August 17, 2014 Peter, Adrian is obviously not married, with a woman in tow he won;t have any money in his pocket. ATB, Trevor Quote
JAGMAN999 Posted August 17, 2014 Report Posted August 17, 2014 I had a pen stuck in my track stopping the seat moving all the way back . there are 4 plastic covers over the seat removal bolts. you can easitty see them if you look on the 4 corners. Then after removal of the covers it is a straightforward bolt removal for each corner.Dave Quote
sparky01 Posted August 17, 2014 Author Report Posted August 17, 2014 Thanks chaps for all your help, will give it a go tomorrow morning,grand daughters Birthday today so a bit busy, Thanks again Adi. Quote
knightsmith Posted August 17, 2014 Report Posted August 17, 2014 Adrain, I'm sure it isn't anything to worry about. ATB, Trevor Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.