flyboy

handbrake problem

Recommended Posts

Hello all  im looking for some tips i have a 2002 s-type s and i have a problem with the EHB its showing fault ive tried the reset with no joy :(  it tells me to apply break and when i do i get the red flashing break light come on but no movement at the rear i have unplugged the power mod to over ride it and the motor and handbrake is free ??.

lost now can anyone help please 

Share this post


Link to post
Share on other sites

Hi Neil, and welcome to the Club.

 

I have had the same problem, and the cure I used was to disconnect the battery, leave it disconnected for about ten minutes, and then connect it again.  

 

That should clear the fault.  You will have to reset your settings again.

 

Kenny might look in and give you some detail, which is always very good.

 

Regards,

 

Peter.

Share this post


Link to post
Share on other sites

Hi Neil, and welcome to the Club.

 

I have had the same problem, and the cure I used was to disconnect the battery, leave it disconnected for about ten minutes, and then connect it again.  

 

That should clear the fault.  You will have to reset your settings again.

 

Kenny might look in and give you some detail, which is always very good.

 

Regards,

 

Peter.

 

Not an idea on this one sorry without being there whereupon I would plug in my OBD2 reader and look for any fault codes.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...