david moore

rear boot/spare wheel cover.

Recommended Posts

after being back off our holiday and taking the suit cases out the boot i noticed that the cover had sunk down into the spare wheel? after inspection i found that the cover is made of thin cardboard! and had split due to the weight of our cases. so off to the timber yard with my old split cardboard as a pattern, and they cut the shape to the same as the old,.... but i had 5ply marine board or half inch thick. then glued everything back, material was a bit fiddly to do!  but also added a brass flush fitting handle.  material cut out then recess out wood to fit the brass handle.  its now easy to lift up and get at spare wheel. 

WP_20160618_14_00_43_Pro.jpg

WP_20160618_14_01_49_Pro.jpg

WP_20160618_14_02_12_Pro.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...