Latest Posts

Just my luck, non in stock at present but we will get there, car still driveable just getting a shudder at 50-60. You would think that all the shafts / bearings are the same circumference 2008 - 15 wouldn't you Regards Peter

I am in the process of removing the A pillar inside trim on my 2011 XK, left hand drive model. After researching the process to remove the trim it seems that it should simply pop or pry off if necessary. The bottom of the trim seems to be loose but the top absolutely will not release. My car also has the microphone mounted near the top of the trim panel. Is the microphone attached such that it is keeping the trim from releasing? The microphone has two rivets attaching the back to something behind the trim. It looks like I may need to drill out the rivets to release the microphone and the trim. I wonder if anyone has experienced the same problem. Thanks in advance!

You’re welcome, Paul. If you intend to remove the battery then always the negative first.

I have been thinking about it and still think the problem is a jolt to a rotating part is setting off a resonance. But that requires sufficient freedom of movement to allow the parts to physically move so if it were the propshaft there should be play in the bearings / their mountings or the rubber / Universal joints themselves. Likewise in the driveshafts but the driveshafts do hve a built in abilty to move vertically at the wheel so possible more likely??? Do let us know how you get on. Good Luck.

Prime suspect with these symptoms is the key itself - if you have a spare key, try that before anything else. There is an RF-ID chip inside the key, these can fail at any given moment in time with no warning. If they do, the car will not turn over. Also try locking/unlocking several times in a row with the remote fob.

Finish

About 90 miles ago (after a 30 mile motorway dash) the red warning light shaped like an engine came on and stayed on , i.e. "engine/transmission emissions issue" . Had a diagnostic this morning ... nox sensor and injector need replacing! But - after being on continuously for 3 days/90 miles the light didn't come on when I started up this afternoon and has stayed off throughout an hours drive ... ??!! Any ideas/similar experience please? Thanks in advance

Have a leak coming from lower reservoir tank. This has happened 4 years ago. To buy a new tank isnt expensive but the labour charge is. My question is why do you need this additional tank. Why cant the pipes from expansion tank be enough. Sorry if this is a silly question but im not a mechanic.

Thanks Gents, literally just found the hose I needed at a dealership in Ireland. Managed to find someone with access to Jaguar stock list. Apparently I managed to snag the only one in the UK. I did consider the custom hose route, that was going to be my next move if Jaguar couldn't supply them. All back on the road now.

Thanks, Jim. I haven't seen a function to allow me to have the rear view camera on without reverse being seleected but I will investigate further. The 2016 model doesn't normally suffer from the boot wiring issue of the earlier models but I must admit that the wiring was my initial thought. My local garage are pretty good on electrical issues and they tell me that they have encountered many issues with JLR cameras.

I remember seeing that on show in the Uni many years ago

Thank you John.

Thanks Jim, forgot about the Halfords colour match system, I have found a local specialist who would refurbish the wheels, just about to find out how much he charges, he comes highly recommended and would also do the wheels at your home if needed. Many thanks again for your advice.

Check out the Furniture Clinic, who seem to have a fix for just about everything. https://www.furnitureclinic.co.uk/wood-care-products/wood-repair-products N6 JMX

I have a small crack in the wood trim on the driver's door (under the M in Meridian). I think it's the plastic covering. How do I fill in the crack and keep it from spreading?

Hi Dave, thank you for being good enough to take time to take and send these pics. After the weekend settling of the overheating event I have decided to purchase a new top hose and heater control valve and have them fitted. I shall be putting forward to my guardian angel a compression test done and also a cooling system pressure test. Also if possible flow test the rad as well. I think this is the best way forward for now. I've also bought a new radiator expansion tank cap. Thanks again for all you help, regards, Tony.

Hi "You can connect direct to the battery terminals" Just a slight correction to above. My understanding is that you should NOT connect directly to the -ve earth terminal on the battery itself, but to a good body earth point. I use the spare wheel mount. The Battery Monitoring Module sits on the -ve battery connector and so if the charge current by-passes it rather than flowing through it gets confused as too how much charge the battery has 🙂 Jim is spot on saying you will need an AGM compatible charger. I use the CT5 START/STOP and have a CTek extension which runs into the boot above all of the floor covers so I can just "plug and play". IMHO it is worth doing a regular top-up charge as these are VERY battery hungry cars. John

Yes i must find out what these S models are. Are they diesel v6?

https://www.eventbrite.co.uk/e/jaguars-the-gathering-2024-tickets-805693820907 2024 tickets

Hello, Is anyone interested in buying 2 Jaguar XJ8 catalytic converters Part numbers: NNG 6700AA NNG 6701AA

Aftermarket maybe? Don't think my 2001 has such a thing.

Hi I'm looking to do CCF edits. Any recomendation on what and where to buy? Thanks

Good question. I've used an Autel AP200 white so far. Annoyingly it doesn't list the 2.0 petrol engine, but when I select diesel most things seam to work. I would like one to change configuration options (CCF file)

Thanks for the Picture Simon. Mine came without a wheel chock. I happen to have a LR one that looked the same but couldn't get it to fit, until I saw your picture with the chock sticking out of the foam. I see from ebay that an after market company are selling spare wheel kits these days. Called RoadHero

Hi John, I’ll let you know how I get on. Thanks again for your interest. Alastair.