Latest Posts

Hi Paul, A code reader will tell you exactly which part of the system is flagging the fault. Usually it will be one of the 2 impact sensors at the front of the car. On your car, both can be changed from the top without having to remove the nose cone. This will help;

....Looks like it is same process as in XF 🙂 Setup should take you to the appropriate security settings to enable just the perimeter alarm when on a ferry. PDF.js viewer.pdf

Hi Karol Only suggestion I can make is have you thought it might just be due to having 20" wheels? I know you have tried 18" but those were with winter tyres. I have 19" wheels on my 2013 Sportbrake and recently went to Northern Ireland in it, with brand new Bridgestone Turanza 6 all seasons all round. I had to stop twice and check I didn't have a puncture as the road surface locally was clearly different to those in NW England and I felt I could feel every imperfection in the road 😞 I am sure the narrower side-walls on 20" wheels would only have exacerbated the issue. Is there anyway you could try a set of 18" wheels with decent summer tyres? Also could you clarify the problem? Feeling bumps: do you mean through the body - Front / back / steering? Any accomanying noises? Also I would understand wobble as a clear side to side shake, is that what you mean? Can you reliably repeat the issue by repeating a journey over a section of road at the same speed? Good Luck John

cob

Thanks Jim, forgot about the Halfords colour match system, I have found a local specialist who would refurbish the wheels, just about to find out how much he charges, he comes highly recommended and would also do the wheels at your home if needed. Many thanks again for your advice.

Check out the Furniture Clinic, who seem to have a fix for just about everything. https://www.furnitureclinic.co.uk/wood-care-products/wood-repair-products N6 JMX

I have a small crack in the wood trim on the driver's door (under the M in Meridian). I think it's the plastic covering. How do I fill in the crack and keep it from spreading?

Hi Dave, thank you for being good enough to take time to take and send these pics. After the weekend settling of the overheating event I have decided to purchase a new top hose and heater control valve and have them fitted. I shall be putting forward to my guardian angel a compression test done and also a cooling system pressure test. Also if possible flow test the rad as well. I think this is the best way forward for now. I've also bought a new radiator expansion tank cap. Thanks again for all you help, regards, Tony.

Hi "You can connect direct to the battery terminals" Just a slight correction to above. My understanding is that you should NOT connect directly to the -ve earth terminal on the battery itself, but to a good body earth point. I use the spare wheel mount. The Battery Monitoring Module sits on the -ve battery connector and so if the charge current by-passes it rather than flowing through it gets confused as too how much charge the battery has 🙂 Jim is spot on saying you will need an AGM compatible charger. I use the CT5 START/STOP and have a CTek extension which runs into the boot above all of the floor covers so I can just "plug and play". IMHO it is worth doing a regular top-up charge as these are VERY battery hungry cars. John

Yes i must find out what these S models are. Are they diesel v6?

https://www.eventbrite.co.uk/e/jaguars-the-gathering-2024-tickets-805693820907 2024 tickets

Hello, Is anyone interested in buying 2 Jaguar XJ8 catalytic converters Part numbers: NNG 6700AA NNG 6701AA

Aftermarket maybe? Don't think my 2001 has such a thing.

Hi I'm looking to do CCF edits. Any recomendation on what and where to buy? Thanks

Good question. I've used an Autel AP200 white so far. Annoyingly it doesn't list the 2.0 petrol engine, but when I select diesel most things seam to work. I would like one to change configuration options (CCF file)

Thanks for the Picture Simon. Mine came without a wheel chock. I happen to have a LR one that looked the same but couldn't get it to fit, until I saw your picture with the chock sticking out of the foam. I see from ebay that an after market company are selling spare wheel kits these days. Called RoadHero

Hi John, I’ll let you know how I get on. Thanks again for your interest. Alastair.

I have exactly the same problem with both my front windows my 2008 XJ Sovereign. Did you manage to resolve it? I’ve only recently purchased mine and will be looking into it.

Hi, I have recently purchased a 2008 XJ Sovereign 2.7 and I have a problem with both front electric windows. The rear windows work perfectly. They front windows will only move up or down in short increments. One press to go down two or three inches at a time. But when they go up I have to click at least 8 times for them to move two or three inches. Can anyone tell me how to fix this please?

Hi , I have the same issue with my 07 2.7tdvi , any luck with solving the problem ? I've spent plenty on mine too and it's very frustrating !

I had the timing chains/tensioners/guides replaced and new Lifetime Bilstein Shock Absorbers installed.

Thank you, I’ll check this evening

Hi Phil Info to help replace the stalk is here: http://www.jagrepair.com/JaguarXFLightStalkReplacement.htm Lots of other useful info on that site. Sounds like it might be a dodgy contact in the stalk or a faulty Central Junction Box which controls current flow to both the indicators and the headlights. Does indicating turn main beams on even when light switch is off, or does it just move from dipped beam to full beam when the headlights are on and you try turning? John

Hi ste-- A big welcome to the club be nice to see a photo of your 1994 XJs all the best --- Frank

1994 xj40s i have owned the car for 3 years and i have a stalling problem.The car starts first time but soon as it gets to normal temperature it goes into a stalll if i keep the engine going by revving the engine manager light comes on and drives perfect . I have changed the temperature switch and lamba sensor exhaust and egr valve and also get fail 44. i have had the garage look at it but still can not find the fault any help would be very much appreciated Thanks ste