Wrinkly

Does the bumper have to be removed to fit new adjusters to dipped headlamps and can the new adjusters be fitted with the lamps in situ on the car? Cheers and thanks, John

Unknown

Ate

Severn

Sailors

Navy

Joe I very recently rejuvenated the glass on all four headlamps and fortunately they look almost new. I initially thought that this was why dipped beam was not great. The rejuvenation of the glass along with fitting (as per your good recommendation) RING Xenon 200 bulbs has not achieved what I was looking for in respect of dipped beam performance. My latest thought is now that the headlights may need readjusting and then I found out that there is a problem of S Type adjusters failing. I will try and test the high beam light tomorrow in the fashion you have described to confirm if the adjuster/s are broken. I am hoping not because I do not fancy the job of removing the front bumper in order to remove headlamp units to be able to fix them. Have identified a person who will repair these adjusters on both lights for around £90 plus postage. You have to remove the light units and send them to him. He splits the lenses and totally cleans everything as well. I should hope he did for that money. !!!!! Feel as though I am between "a rock and a hard place" at the moment, and not certain how to proceed. I might just leave things as they are at the moment, especially as I do not do that much night driving these days anyway. Thanks once more for the further information. Best Wishes and Regards, John.

Defence

Bouncy

Jump

width

Now covered 28 miles and no Yellow Engine Management Light as yet. Usually reappears, after being reset, in between 18-20 miles. Fingers crossed it may be cured/fixed. Beat Wishes, John

Wave

Joe Many thanks for the information. I have replaced dipped beam bulbs with RING Xenon 200 bulbs and am finding that the beam has not improved tremendously. I have seen the replacement adjusters that are available, which lead me to believe my lights may be suffering "the droop", as you refer to it. I was hoping that some models did not have electric adjusters, thus saving the what I imagine is a fiddly fix procedure. I am presuming the H7 fitments that I have on my car are not HID. Have gained knowledge/information from somewhere, that I cannot remember where, that the whole of the front bumper has to be removed to fix headlight units. Does this apply to fitting the replacement adjuster kits that are available from Ebay. Hoping that the fix is relatively straight forward. Best Wishes and Regards, John

Do ALL Jaguar S Types have electric headlamp adjusters, or only certain models of certain years? Many thanks and Regards, John

American

Pigeon

Blackbirds

Suet

Chop

Shake

No idea which model of Code reader you have. My Jaguar Foseal OBD2 Code Reader informs you of which Cylinder number in which Bank is causing the problem. Good Luck and Best Wishes, Regards, John

Many thanks Jim. Cheers , John

Jim Likewise am I ok to fit direct to battery on my 2005 (Facelift) S Type. Thanks and Regards, John

Two