Jump to content


Raistlin

Moderators
  • Posts

    2,156
  • Joined

  • Last visited

  • Days Won

    138

 Content Type 

Profiles

Forums

Events

Gallery

Store

Premium Membership Discounts

News

Videos

Posts posted by Raistlin

  1. Sorry Dave, but if you're diving into SDD and coming up with errors I can't get involved any further because you CAN brick your car with SDD. I hope you get the fault cleared.

    I'm not having a pop at you here it's just that I can't be sure what has been done now and I could make it worse.

    • Like 1
  2. My XF (X250) is having the boot to body cable loom blues so I can't open the boot electronically. I can't use the mechanical key either as the boot lid has been replaced without changing the mechanical lock barrel

    SO... is there any way to get into the boot without causing damage please?

  3. OK Dean, using the modules, locate the connectors in the luggage area loom.You will find that the voice module will not be fully populated.

    Install the modules where required on the Kaiser panel. This is the large sliver coloured plate which is bolted to the side if the luggage panel. I'll see if I can find some helpful pictures.

    Disconnect the D2B connector from the NAV unit and plug it into the extra portion of D2B cable. Connect D2B to each module, there is no specific order.

    Mount the CDC in the rack and make sure each module has a power cable and D2B attached.

    Connect the aerial to the bluetooth module and locate the aerial at waist level in the trim so it can't be seen.

    That should be you ready to go 🙂

    I've just googled "X-type voice" and "X-type bluetooth" and there are loads of pictures you'll find useful.

    PM me your e-mail address and I'll see if I can find some detailed instructions.

×
×
  • Create New...



Forums


News


Membership